Dualog Link Client - Installation & Activation

INTRODUCTION

The Dualog Client allows you to install the new Digital Platform services. The client can be installed on any client PC on board, as long as the system requirements are met.

Depending on the service you are planning to install, you may need to install the same client on different PCs on board i.e. you can have Dualog Protect on one PC and Dualog Drive on another PC. If unsure about where to install it, get in touch with us. We will be happy to help. 

PREPARATION STEPS

You will need a couple of things in place before you get started with the installation of the Dualog services.


1.gif

INSTALLATION

  1. Launch the “DualogClientInstaller.exe”
  2. Follow the process, choosing the installation path and the service(s) you wish to install
  3. A Complete window will appear after it has successfully completed the installation > Click “Finish”.
  4. The next step will be to register the client to the Digital Platform.

test.gif 

 

ACTIVATION OF DUALOG LINK CLIENT (VIA ACTIVATION CODE)

Once the installation is completed successfully, you will be re-directed automatically to the following page:

  1. Click on "Check connectivity" to perform the mandatory internet connectivity test.
  2. Once the internet connectivity test is successful, click on "Activation Code" (Go here to troubleshoot a failure in one or more checks)
  3. Input the activation code that must first be created on the Dualog Apps portal.
  4. Click on "Activate"
  5. Upon successful activation, the installation is now active and reflected on the Dualog Apps portal under Installations.test.gif

 

ACTIVATION OF DUALOG LINK CLIENT (VIA MANUAL SELECTION)

Once the installation is completed successfully, you will be re-directed automatically to the following page:

  1. Click on "Check connectivity" to perform the mandatory internet connectivity test.
  2. Once the internet connectivity test is successful, click on "Activation Code" (Go here to troubleshoot a failure in one or more checks)
  3. You will be redirected to apps.dualog.com, where sign-in is required with a valid account.
  4. Select the organization, and ship you are installing on, followed by an installation name before clicking on "Activate Client"
  5. Click on "Activate" on the confirmation window.
  6. Upon successful activation, you will see the confirmation message.test.gif

 

SHORESIDE CHECKS

Before moving forward, we need to check that the Dualog Cloud is “seeing” the new ship online.

  • VERIFICATION ON APPS.DUALOG.COM
  1. Go to https://apps.dualog.com/installations, and confirm that the ship you have installed is “online”.
  2. Verify that the required service(s) has/have been installed and shown.

4.gif

If your ship is not listed or offline, please make sure all services are running. In case you are not able to get the ship online on apps.dualog.com, get in touch with Dualog Support.

      3. Click on the individual installed service(s) and confirm that the needful has/have been enabled as well. (Configurations or tasks would have to be pre-configured prior to this)

  • Dualog Drive

mceclip2.png

  • Dualog Protect

mceclip3.png

  • Dualog Endpoint Security

mceclip0.png

  • Dualog Access

mceclip4.png

 

If you have difficulties or have further inquiries on any of the above, get in touch with Dualog Support.

 

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

0 comments

Please sign in to leave a comment.